NOT FOR SALE AT THIS TIME

Water Jet YD-1212 New

 

  

$69,000.-

Clearance price

Equip with YD-300 pump

(not including Installation & Shipping)

Warranty 1 Year

 

Technical Data

Structure Flying arm
Cutting table size 51" x 51" (1300x1300mm)
X-axis 48" (1200mm)
Y-axis 48" (1200mm)
Z-axis 5" (130mm)
CNC Controller Step System/AC Servo System
Cutting +-0.1mm
Repeatability +-0.05mm
Travers speed 6000/15000mm
Power supply 220V 3PH, 50/60Hz
Warranty voided

Technical Data for Supercharger

  YD-300
Max. pressure 300Mpa/40,000Psi
Intensifier ratio 24:1
Max. flow rate 3.1L/min
Inlet pressure 0.4Mpa
Max. orifice size 0.25mm (0.01")
Max. pump outflow 100L/min (25G/min)
Max. pump pressure 300Mpa
Volume of oil tank 200L (50G)
Motor 30HP
Power supply 220V 3PH 40/60Hz
Dimension 70" x 48" x 45"
Weight 1100LB

CATALOG

 

FINANCING AND LEASING PLANS AVAILABLE

 

Cutting Thickness

Stainless Steel - 1.5" Plastic & Foam - 8"
Aluminum - 3" Glass - 3"
Ceramic - 1.5" Titanium - 1.5"

Granite 1.5"

 

Work Table of the YongDa YD series CNC Water Jet
1. The water jet has omnipotent cutting functions. It is used for any plane curve cutting.
2. Reinforce machine tool assures the cutting head does not vibrate during fast moving. The operation is steady,    with fast cutting speed and high precision.
3. The screws and guide rails are provided by renowned Germany manufacturers. The X and Y axis apply unique oil dip lubrication, together with water-proof and dirt-proof structures; so as to assure the processing precision of the machine and prolong the life of the screws and guide rails furthest.
4. The cutting head is equipped with reliable, pneumatic, high pressure water switch, which enhances the efficiency.
5. The unique sand valve design enables smoother flow of the sand, more convenient cleaning and the prevention of water leakage.
6. The stainless steel protection cover is dirt proof, waterproof, rustproof, erosion proof and convenient for cleaning; keeping the work table bright all year.
7. There is Flying-arm or Bridge type of structure for working table, Step System or AC Servo System for CNC controller.
Machine Parts Control Panel Servo Motor
NC program software and CNC digital control system.
1. The AUTOCAD software combining with automatic programming software could rapidly produce NC procedure   responding to the CNC system.
2. The special communication transfer software realizes fast and two-way transfers between PC and CNC procedure.
3. The new type of CNC system enables the feeding speed of the arc-line cutting to reach 300mm/min; the fast feeding speed is 8000mm/min.
4. The memory of the CNC system is larger, thus is stores more processing programs and the process assistant time is largely reduced.
5. The extensive graphics library contains characters, plants, animals, religious symbols, etc., which saves time spent on designing and drawing.
6. The control panel is fixed with touch switches that are dustproof, waterproof, greaseproof, reliable and durable.

Extra-High Pressure Supercharger

YD-300 Type Supercharger: High pressure system is made of high pressure materials, imported from the U.S.A. It is a standard supercharger, designed and manufactured by ourselves. Hundreds of superchargers have been manufactured and used. After much practice, we've found that the supercharger works with stable performance, is very efficient and is of low cost in use and maintenance.

  1. The full electronic commutation and Wye-Dolta start-up stabilize the pressure of the supercharger.
  2. The security device has the functions of pressure detection, limit alarm, automatic protection, etc.
  3. Continuous hyper pressure boosts the speed and maintains the impeccable cutting quality.
  4. Precise filter equipment in oil inlet and oil back-flow of the hydraulic pressure system, assure oil route clean and fluent.
  5. The precise fourfold water filter series connection is applied. The accuracy of the filter core can reach 0.45UM, so that the water purification is improved, and the life of every part of the pressure booster system is hardly prolonged.
  6. The high pressure sealing washer is made precisely of imported compound materials, hence the sealing performance and life of the product are largely sustained.
  7. All the high-pressure parts are processed by the advanced CNC digital control cutting machine tool, which strictly goes by the special processing technique, assuring higher precision and better commutability of the hyper pressure parts.
  8. The advanced pressure self-adjustment pump assures the continuous and stable pressure of the inlet water.

Auto Abrasive Delivery System

$5400.- (Optional)

Call for pricing 800 788-8478

Talk to a fabricator that has this saw - Referral list

*Tech support

Our tech support is the same as any other bridge saw supplier in the states.
From our experience:
1. We help you over the phone. (90%)
2. We tell you to get local machine or electrician (we cover the labor + any parts) (5%)
3. If local help don't help we send our technician. (5%)

 

International toll free 800 788-8478 (USA Pacific Standard Time)

Back to Machine Center

Live chat by Boldchat
Live chat by Boldchat

Stock availability Financing Referral List MAYA-625 MAYA-400 CNC Machine
Fabricator Special Compare Saws Spare Parts  Machine Center Water Recycling Water Jet

Our Moto

PB Marble Services Co. from Los Angeles CA is determine & committed to provides the best granite bridge saws, marble or any stone in nature as well as sell the best money per machine, any shop will be proud of in CNC machine center or abrasive Water Jet cutting machines, this equipment can also cut any metal, plastic etc. our commitment & dedication to service this machine force us to have all spare parts in stock at our warehouse. we hop and do satisfy each and everyone of our customer, a list of our loyal customer can be found on our site.

*We will pay for your trip to the factory in China including 5* hotels if you buy the equipment.