TYPES OF SURFACE TEXTURES

There are many different types of stone available today. When stone is

ordered, it is fabricated with a particular type of surface. There are

six main types of surfaces that are selected:

Honed: Provides a flat to low sheen gloss. Different levels of gloss can

be selected. This surface is very smooth, but often very porous. This

texture is common in high traffic buildings. Honed floors should always

be protected with a Penetrating Sealer because it has wide-open

pores. Honed stone colors are not as vibrant as a polished stone.

Polished: A glossy surface that wears away with time due to heavy foot

traffic and using improper maintenance procedures. This surface is very

smooth and not very porous. The reflectivity of polished crystals brings

out the brilliant colors and grains of natural stone. The shine comes

from the natural reflection of the stone's crystals. The polish is

provided by polishing bricks and polishing powders that are used during

fabrication. The shine is not from a coating.

Flamed: A rough surface that is developed through intense heat. During

fabrication, the stone is heated up and the crystals begin to pop, thus

forming a rough surface. This surface is very porous and must be treated

with Sealers.

Tumbled: A slightly rough texture that is achieved by tumbling small

pieces of marble, limestone, and sometimes granite to achieve an

archaic/worn appearance. It often requires an application of Stone Color

Enhancer to bring out the colors.

Sand Blasted: This surface is the result of a pressurized flow of sand

and water that provides a textured surface with a matte gloss.

Sawn: A process performed by using a gang saw.

Bush Hammered: A pounding action that develops a textured surface. The

degree of roughness can be selected.

Regardless of the type of surface that is to be maintained, all stones

should be protected with Penetrating Sealer.

A sealer is sufficient for honed and polished floors. Sealers

should be used on flamed, sand blasted, sawn, and bush hammered

surfaces.