Client Responsibility & Preparation

 

MAYA-625

Client Responsibility & Preparation
For download Client must prepare a crane or pay for a trans load (from a container to flat bed)
For the installation you will need a forklift (6000 LB including a driver)
Concrete level floor,
One man for help.
220V 3 phase power ready wires to our transformer & from to the main machine panel.( +5%) regulated. (100Amp.)
The Volts & Hertz of the installation location must be specific for the transformer (A30KVA) (220 3PH 60Amp. 50/60 Hz)
Power Cables (Transformer to control panel) an electrician must be on site at start of installation, and be done the first day.
60 Gallons #46 Hydraulic oil
15 Gallons W-30 Motor oil
28 - Concrete anchors (red heads) 3/4" x 51/2"
Heavy duty hammer drill.
Water hose to the machine.
Client responsible to cover the table, concrete (recommended 2.5") or wood [ max. load 2,500LB ] after installation.
All this has to be ready before we can send a technician to install.
Technician local transportation & lodging.
Maximum 2 days for installation any extra day technician on a nun prepared site will be charged $500/day

 

MAYA-400

Client Responsibility& Preparation
For download Client must prepare a crane or pay for a trans load (from a container to flat bed)
For the installation you will need a forklift (6000 LB including a driver)
Concrete level floor,
one man for help.
220V 3 phase power ready wires to our transformer & from to the main machine panel.( +5%) regulated. (50Amp)
The Volts & Hertz of the installation location must be specific for the transformer (A30KVA) (220-480V 50Amp. 50/60 Hz)
Power Cables (Transformer to control panel) an electrician must be on site at start of installation, and be done the first day.
20 Gallons #46 Hydraulic oil
15 Gallons W-30 Motor oil
28 - Concrete anchors (red heads) 3/4" x 51/2"
Heavy duty hammer drill.
Water hose to the machine.
Client responsible to cover the table concrete (recommended 2.5") or wood [ max. load 2,500LB ] after installation.
All this has to be ready before we can send a technician to install.
Technician local transportation & lodging.
Maximum 2 days for installation any extra day technician on a nun prepared site will be charged $500/day.

 

Tech support
Our tech support is the same as any other bridge saw supplier in the states.
From our experience:
1. We help you over the phone. (90%)
2. We tell you to get local machine or electrician (we cover the labor + any parts) (5%)
3. If local help don't help we send our technician. (5%)
 
*Disclaimer
We can't guaranty shipments dates do to carrier or port policies problems.
Due to circumstances we have no control
When receiving the container check for any shipping damage take pictures before unloading. (notify us asp)
We reserve the option to make changes in our machine capabilities.
 
Warranty: when a client install himself, the labor part of warranty is voided.
Also voiding the warranty - moving the saw from one site to another & not using our technician

Notes: We recommend changing the water hose that comes from factory with pressure hose

Our Moto

PB Marble Services Co. from Los Angeles CA is determine & committed to provides the best granite bridge saws, marble or any stone in nature as well as sell the best money per machine, any shop will be proud of in CNC machine center or abrasive Water Jet cutting machines, this equipment can also cut any metal, plastic etc. our commitment & dedication to service this machine force us to have all spare parts in stock at our warehouse. we hop and do satisfy each and everyone of our customer, a list of our loyal customer can be found on our site.

1