Stroke length of X axis	120” (3000mm)
Stroke length of Y axis	60”   (1500mm)
Stroke length of Z axis	14”   (350mm)
Max dia. of tool	140mm 5/11”
Max length of tool	8”
Max storage capacity	10R + 10L
Max weight of tool	6 LB
Size of working table	126” 63”
Total power	18 KW (24HP)
Overall size	16’ x 5’ x 8’  (delivered assembled)
Weigh	8000 LB
compatible with G code or DXF files	YES
Spindle	Made in Italy
CNC control system	AC servo system
Delivery time	75-90 days
Training	Includes on-site & maintenance training
Installation & Training	Included
Software	Master Cam 9.0 not included
Warranty	1 year parts & 1/2 year labor *

 

CNC Machining Center (Made in China) Is a type of three dimensional CNC processing equipment designed and manufactured by YONGDA (China) to meet nowadays demands of high precision, high speed and high efficiency under the toughest competitive circumstances.. The machine has the functions of milling, grinding, polishing and sculpting. It is especially suitable for producing high grade basin board and other abnormal products Made of stone, ceramic, glass and micro-crystal stone. The machine will automatically Finish the processing of any required profile by simple setting.  The products are of high precision and good glossiness rate. Furthermore the machine can also run CNC programs to carry out different kinds of sculpting and mould processing, Etc.

Order a DVD of the Edge polishing & Countertop machine

Download a Catalog (pdf)

Back to Machine Center

FAQ

Is there a standard for water filtration and quality of water? The water for cooling the spindle must be clean water, and the water for other parts there is no demand. What volume of water is required, both filtered and/or unfiltered? There is no demand for it What are the specs on the vacuum pump? The power for the vacuum pump is 2.2KW, the rotate speed is 15 L/S. Who makes the machine spindle? SACCARDO from Italy What type of motors power the gantry and axis directions? For the spindle equipped with 1.8KW servo motor; for the axis equipped with 1.5KW servo motor Are any vacuum hold-downs provided with machine? On the controller, there is a button to control the vacuum pump on/off Any machines cones or tooling provided? If u buy our machines, we will send some spare parts for u for free, No tooling supplied with the machine. Is there any description of the software and what the capabilities are? It can be applicable for many kinds of software, such as UncGraphics. NX3.0:600MB ;Mastercam9.0:300MB. What is the delivery time after order? About 90 working days Is a deposit required for the order? YES What are the payment terms? $30,000.- down, balance before land ship. Are there any better pictures of the machine showing some of the major components such as spindle, vacuum manifold, tool holders, machine bed, etc. Please check this Page What is the machine major components made of? (steel, galvanized, aluminum, plastic, etc) stainless steel such as the cover, plastic such as the water pipe, and also copper, aluminum Is there the capability for network communication? Yes, What are the power requirements of the machine (Volts, amps, hz)? It base on the customer's demand, usually is 380V or 220V Any transformers or power conditioners required?The transformer is equipped on the machine Are all machine parts and components stocked in the USA? YES What is the typical response time for parts and/or service requests? 24-48 H What other machines does YONGDA manufacture? Any imported into the USA? Water Jets, yes we have in the US Any special foundation requirements for the machine? no need (free standing)

Free spare parts

1. Tool holder             2. Air tube 3. Air tube connector 4. Water switch 5. Polishing tools 6. Sculpting tools 7. Grinding tools 8. Milling tools

20pcs 30m 20pcs 5pcs 1set 1set 1set 1set

*Parts that aren't warranted

1. The water pumps 2. Switch 3. Infrared system 4. The rubber on the copula

*Tech support

Our tech support is the same as any other bridge saw supplier in the states.
From our experience:
1. We help you over the phone. (90%)
2. We tell you to get local machine or electrician (we cover the labor + any parts) (5%)
3. If local help don't help we send our technician. (5%)

Client responsibility

technician Local transportation & lodging.

PB Marble Services Co. from Los Angeles CA is determine & committed to provides the best granite bridge saws, marble or any stone in nature as well as sell the best money per machine, any shop will be proud of in CNC machine center or abrasive Water Jet cutting machines, this equipment can also cut any metal, plastic etc. our commitment & dedication to service this machine force us to have all spare parts in stock at our warehouse. we hop and do satisfy each and everyone of our customer, a list of our loyal customer can be found on our site.