Terrazzo Grinding Machines

Designed to Function as an Edger
Magnetic Starter or Variable Speed Drive
Two Disc, Three Stones per Disc
Four 42 lbs. Pocket Weights
Wet/Dry Setup
Stainless Steel Guards and Water Tank
Direct Drive, No Belts

(OPERATING MANUAL PDF)

SPECIFICATIONS

Motor	5 H.P., 230 Volt, 60 Hz, AC, Single Phase, 24 Amp
Speed of Discs	450 RPM
Weight of Machine	650 lbs.
Shipping Weight	734 lbs.
Weight of Head	595 lbs.
Length of Machine	40"
Width of Machine	20"
Height of Machine	36"
Water Tank	10 gallons
Power Cord	100 feet (8-3)

Optimal for jobs under 5,000 sq. ft.
Easily Operated by a Single Person
Great Machine for Residential Contractors
Magnetic Starter or Variable Speed Drive
Mild Steel or Stainless Steel Guards and Water Tanks
Wet/Dry Setup
Direct Drive, No Belts
Leveling System
Adjustable Handle
Uses Plug Stone Shape, Bolt on Beveled Edge Disc to Universal Tool Plate, or Speed Shift System with Beveled Edge Disc

Production Rates

Mastic removal rate of 350 sq. ft. per hour
Thin-Set removal rates of 400 sq. ft. per hour
Thin-Mil coatings removal rates of 200 sq. ft. per hour
Concrete polishing rates of 450 sq. ft. per polishing pad per hour (depending on grit)
Rough Terrazzo rates of 600 sq. ft. per day

(OPERATING MANUAL PDF)

Specifications	701-S
Motor- 230 V, single phase, 'T' type	7 1/2 H.P.
Speed of Disc- RPM	391
Surface Feet per Minute	2862
Abrasive Pressure on Discs	440 lbs.
Sweep of Discs	28"
Width of Machines	28"
Water Tank Capacity	7 gallons
Length of Machine- handle up	29 1/4"
Length of Machine- handle down	56 1/2"
Height of handle in grinding position	37 1/2"
Weight- net- machine only	800 lbs.
Gross Weight Domestic crated	860 lbs.
Power Cord	100 feet (8-3)

Join Monthly Special
Add your email address to receive the Monthly specials