SYSTAR XL is
a top-end stone fab center, stone cutting machine and mitre saw in
one. Thanks to the high-end linear guides and a non-vibrating steel
frame, it performs accurate
straight and miter cuts.
STONE PROCESSING TYPES
stone cutting: 4 sides at
90°/45°
shaping and polishing (internal and external)
cutting out sink holes (also by blade)
recessed drainer/drain grooves
slots on edges
edge polishing (on straight and inclined edges)
WHAT CANE YOU CREATE
countertops
bas-reliefs
L-shaped islands
backsplash
WHAT WILL YOU LOVE IN THIS FABRICATION WORK
CENTER?
Large work strokes
Open frame (no-limits for the length of the slab)
9 spindle positions
Fast tool change
818-783-3588
Specifications
WORK TABLE
Work table 3.000 x 1.200 mm, made of natural stone, calibrated on
the machine itself
WORK PIECE DIMENSIONS
- Height: max.140 mm, placed on suction cups (h=40 mm)
- Width: max. 1.580 mm (62.2")
- Length: no limits
OPERATIONAL WORK STROKES:
- Profile tools: 3.550 x 1.450 mm (140"x57")
- Vertical cut: 3.550 x 1.520 mm (max.) (140"x60")
- 45° mitre cut: 3.350 x 1.270 mm (140"x50")
- Edge polishing: 3.400 x 1400 mm (max.)(133"x55")
OPERATING HEAD
- Electro spindle: 2.2 kW with internal lubrication.
- Spindle:
● Stainless steel
● Connection: ½” gas F
● Rotation speed: from 1.500 to 12.500 rpm (controlled by vector
drive)
- Vertical movement: automatic by electromotor
- Vertical stroke: 210 mm
- 9 spindle positions:
● Vertical (for profiling and slot cutting)
● 45° inclination (for disc cutting and bevel polishing) in 4
different positions: 0°, +/- 90°, 180°
● Horizontal (for disc cutting and edge polishing) in 4 different
positions: 0°, +/-90°, 180°
- Pneumatic lifting of the operating head
- Automatic internal and external tool lubrication (starts when
motor is started).
FRAME
- Tubular steel frame coated with epoxy paint
- Dimensions with template-holder closed: 4.000 x
2.000 x 1.950(h) mm (157x78x76)"
- Dimensions with template-holder raised: 4.000 x 2.600 x 1.950(h)
mm (157x102x76)"
- Overall installation area: 4.000 x 3700 x 1.950 (h) mm
(13'x12'x6.5')
- Weight:1.250 kg (2,700LB) TEMPLATE HOLDER
Collapsible (built-in): 2.000 x 700mm (78x27)' ORTHOGONAL MOVEMENTS
- Adjustable to limit the work area
- Slide guides are equipped with adjustable mechanical limit
switches. COUNTERTOP MOUNTING
2 distinct vacuum circuits hold the work pieces firmly in position,
each composed of:
- Vacuum ejector pump
- Pressure regulator
- Manometer
- Suction cups: no. 6 Ø 90, no. 2 Ø 70
- Connection pipes: 4 m, Ø 6 mm POWER SUPPLY
- Supply tension: 230 V–50/60 Hz single-phase (18A)
- Pneumatic pressure: 3 bar
- Air consumption: 150 l/min
- Water pressure: min. 2 bar
- Water supply: min. 15 l/min (4 gl/min) WATER CONNECTION
- Tool lubrication: internal through spindle and by 2 external water
hoses
- Water pistol